Guest Pacific Sweeping Posted September 12, 2019 Hey everyone! We have a 2017 Tymco 600 BAH with the new Blue Logic system that is giving us some operational issues. We start the aux engine up and go to hit any of the hydraulic switches and they turn red, and nothing operates. In the past I have found that the GB lock valve coils and a short in the wiring to the coils has caused this problem. Any ideas or has anyone ran into this yet?? Share this post Link to post Share on other sites
Guest Pacific Sweeping Posted October 15, 2019 Well, after 2 trips to the dealer they found that 2 of the Blue Logic VMM connector pins expanded. we are not sure if someone tried to sabotage us by doing this or if an employee was in there messing around, so we put a lock on the Blue Logic VMM plastic cover so nobody can get in there. Just wanted to share what our solution was for this problem, it haunted us for over a month so i finally sent it to the dealer and they found it. Might be worth it to lock your operators out of control boxes so they cant mess with anything they shouldnt be putting their hands on. Share this post Link to post Share on other sites
